S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-346002.png)
6. Fill up the brake master cylinder reservoir to the MAX mark.
NOTE: Due to the complexity of the fluid path within the integral park brake calipers, it may be difficult to achieve a satisfactory result using the
procedure above when new calipers have been installed. Therefore carry out the following steps to make sure that the system is properly bled.
7. Remove both rear wheels and tires.
8. NOTE: Left-hand shown, right-hand similar.
Remove the logo badge.
9. NOTE: Left-hand shown, right-hand similar.
Remove the anti-rattle spring.
10. NOTE: Left-hand shown, right-hand similar.
Remove the brake caliper retaining bolt dust covers.
