S-Type (X200) V8-4.2L (2005)
11. NOTE: Left-hand shown, right-hand similar.
Detach the brake caliper.
12. NOTE: The inner brake pad must have at least 7mm of friction material. If there is less then 7mm a new pad must be used.
NOTE: Left-hand shown, right-hand similar.
Remove the outer brake pad.
13. NOTE: Left-hand shown, right-hand similar.
Attach the brake caliper with a protective cloth placed between the caliper fingers and the disc.
14. Slowly apply the brake pedal until the piston is extended to the brake disc.
15. NOTE: Left-hand shown, right-hand similar.
Detach the brake caliper.
16. Bleed the caliper.
^
Make sure the bleed tube is firmly attached to the bleed nipple.
^
Submerge the end of the bleed tube in a bleed jar containing a small quantity of approved brake fluid.