Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1279008.png)
Repair
4. Release and remove seat tensioner spring.
5. Slacken and remove headrest motor securing screws and remove drive cable retaining plate.
6. Withdraw drive cable from motor.
7. Release motor harness multiplug (yellow) from mounting bracket, position motor for access and disconnect multiplug.
8. Remove headrest motor from seat.
Installation
1. Position motor in seat frame, connect harness multiplug and seat multiplug in mounting bracket.