Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-811008.png)
8. Install the screw to secure the ground tag and install the three nuts to secure the rear cover.
Tighten the four fixings
9. Install the insulator to the main terminal.
1. Slide the insulator onto the main terminal.
2. Note the locating flat on the insulator and in the rear cover.
3. Install the nut to the main terminal.
10. Install the generator to the vehicle.
11. Connect the battery and install the battery cover. Refer to the Battery Reconnection Procedure. See: Battery/Service and Repair
