XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1621011.png)
10. Detach the front seat head restraint wiring harness retaining clip.
CAUTION: Make sure the cable is not trapped when the head restraint is detached. Failure to follow this instruction may result in damage to the
vehicle.
11. Detach the head restraint from the head restraint retaining post.
-
Align the head restraint wiring harness with the head restraint shaft.
-
Detach the head restraint from the head restraint retaining post.
12. Detach the front seat head restraint retaining post.
-
Release the retaining tang.
-
Detach the front seat head restraint retaining post.
13. Remove the front seat head restraint.
-
Remove the front seat head restraint retaining post.
-
Feed the head restraint wiring harness through the cover.