XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Installation
NOTE: Make sure that no pressure is applied to the mesh grille.
1. To install, reverse the removal procedure.
2. Carry out the battery reconnection procedure.
Radio Console
Removal
1. Remove battery cover and disconnect earth lead from terminal.
2. Remove 'J' gate surround.
3. Remove center console assembly for access.
4. Slacken and remove the six radio console securing screws and partially withdraw the console for access.
5. Disconnect radio assembly.
-
Disconnect console harness multiplugs and aerial co-axial connector.
-
Slacken and remove nut securing earth lead to radio and remove lead from stud.
-
Disconnect radio harness multiplug and position harness clear of center console.