jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Convertible Top Hydraulic Lift Cylinder Hoses|Page 4040 > < Convertible Top Hydraulic Lift Cylinder Hoses|Page 4038
Page 1
background image

Convertible Top Hydraulic Hose: Service and Repair
Convertible Top Latch Hydraulic Cylinder Hoses

Convertible Top Latch Hydraulic Cylinder Hoses (76.86.22)

Removal

1. Power convertible top to fully lowered position.
2. Remove battery cover and disconnect ground cable from battery terminal.
3. Remove trunk floor carpet.
4. Remove trunk front liner.
5. Remove trunk rear finisher.
6. Remove trunk RH liner.
7. Position a piece of absorbent cloth on trunk floor to protect paintwork from any fluid spillage.
8. Sever and remove tie strap securing hydraulic pump hose to pump harness.

9. Mark with location and slacken and disconnect hydraulic hoses from pump.

10. Remove and discard 'O' ring seals from hose connectors and fit blanking plugs to hoses and pump connectors.
11. Remove rear seat cushion.
12. Remove rear seat squab.
13. Remove LH rear quarter casing capping.
14. Remove LH rear quarter casing.
15. Remove LH rear speaker (premium ICE only).
16. Remove front LH seat.
17. Remove 'J' gate surround.
18. Remove centre console.
19. Remove LH sill treadplate.
20. Remove glovebox.
21. Remove fascia LH end fusebox.
22. Remove roof console.
23. Remove the sun visors.
24. Remove the sun visor retaining clips.
25. Remove 'A' post upper trim finishers.
26. Where applicable disconnect microphone harness multiplug.

Convertible Top Hydraulic Lift Cylinder Hoses|Page 4040 > < Convertible Top Hydraulic Lift Cylinder Hoses|Page 4038