XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-911009.png)
19. Install the latch cover, and tighten the retaining screws. (Figure 26)
20. Lift the rear edge of the header seal for access and install the latch cover retaining screws. (Figure 27)
21. Install the retaining studs to the header seal. (Figure 28)
22. Loosely install the left-hand CJB as follows: (Figure 29)
^ Attach the battery positive cable.
^ Tighten the retaining nut.
23. Connect the two left-hand CJB electrical connectors.
