Commander 4WD V8-4.7L VIN N (2006)
12. Remove the four bolts (1) that secure A/C condenser (2) to the radiator (3).
13. Carefully lift the A/C condenser straight up and out of the engine compartment.
INSTALLATION
NOTE: If the A/C condenser is being replaced, add 30 milliliters (1 fluid ounce) of refrigerant oil to the refrigerant system. Use only refrigerant oil of
the type recommended for the A/C compressor in the vehicle.
1. Carefully position the A/C condenser (2) onto the radiator (3).
2. Install the four bolts (1) that secure the A/C condenser to the radiator. Tighten the bolts to 5 N.m (44 in. lbs.).
