Commander 4WD V8-4.7L VIN N (2006)
10. Disconnect the battery wire harness three pin connector (11).
11. Remove the battery wire harness three pin connector (11) from the battery tray (12).
12. On 3.7L and 4.7L engines remove the nut (6) that secures the generator output cable eyelet terminal (7) to the generator output terminal stud.
13. Remove the generator output cable eyelet terminal from the generator output terminal stud.
14. Disconnect the battery wire harness connector (8) from the generator field terminal connector receptacle on the back of the generator.
15. Remove the battery wire harness retaining clip (9) from the valve cover stud.
16. On 5.7L engines remove the nut (5) that secures the generator output cable eyelet terminal (4) to the generator output terminal stud.
17. Remove the generator output cable eyelet terminal from the generator output terminal stud.
18. Disconnect the battery wire harness connector (6) from the generator field terminal connector receptacle on the back of the generator (3).
19. Remove the battery wire harness retaining clips (2) from the valve cover studs.
