Grand Cherokee 2WD V6-3.7L (2008)
CAUTION: Do not hold or pry on the camshaft target wheel for any reason, Severe damage will occur to the target wheel. A damaged target
wheel could cause a vehicle no start condition.
4. Loosen but DO NOT remove the camshaft sprocket retaining bolt. Leave bolt snug against sprocket.
NOTE: The timing chain tensioners must be secured prior to removing the camshaft sprockets. Failure to secure tensioners will allow the
tensioners to extend, requiring timing chain cover removal in order to reset tensioners.
CAUTION: Do not force the Wedge Locking Tool past the narrowest point between the chain strands. Damage to the tensioners may occur.
5. Position the Wedge Locking Tool 8379 (1) between the timing chain strands. Tap the tool to securely wedge the timing chain against the tensioner
arm and guide.
