Grand Cherokee 2WD Limited V8-4.7L (2002)
7.
Remove the three (3) forward-most LEFT SIDE brush guard/trailer hitch (if equipped) mounting bolts (Figure 4). Do NOT remove the rear left
brush guard/trailer hitch mounting bolt.
8.
Loosen, but do not remove, the remaining four (4) brush guard bolts (one left side and three right side).
9.
For vehicles equipped with a trailer hitch, loosen but do not remove, the two (2) rear-most trailer hitch bolts.
10.
Using a large pry bar, reposition the fuel tank/brush guard assembly as far to the right side of the vehicle (passenger side) as possible.
11.
With an assistant holding the tank assembly in the right-most position, and using a 12 inch extension, tighten the three right and the rear-most left,
brush guard bolts to 65 ft-lbs (88 N.m).
12.
For vehicles equipped with a trailer hitch, tighten the two (2) rear-most trailer hitch bolts to 65 ft-lbs (88 N.m).
13.
Install the fuel tank blocker bracket adjacent to the left side of the fuel tank brush guard (Figure 5).
