Grand Cherokee 2WD Limited V8-4.7L (2002)
IMPORTANT:
For vehicles equipped with a trailer hitch, install the supplied spacer between the blocker bracket and the brush guard at the forward-most bolt
hole location.
14.
Position the blocker bracket as far to the right as possible (next to the brush guard) and then install the fuel tank brush guard/trailer hitch mounting
bolts (Figure 5). Using a 12 inch extension, tighten the bolts to 65 ft-lbs (88 N.m).
IMPORTANT:
Tighten the forward-most blocker bracket bolt first.
15.
Secure the electrical harness to the blocker bracket with the harness clip. If the clip was damaged during removal, use a new clip (PN 04688451).
16.
Tighten the front brush guard-to-frame support bracket bolts (Figure 3).
17.
Tighten the bolts for the two (2) rear brush guard-to frame support brackets (Figure 2).
18.
In stall the four (4) rear fascia-to-fuel tank push pins (Figure 1)
19.
Remove the fuel tank support.
20.
Lower the vehicle.