Borrego 2WD V6-3.8L (2009)
Seat Belt: Service and Repair
Front Seat Belt
Components and Components Location
Components
Repair Procedures
Replacement
Front Seat Belt Replacement
CAUTION:
-
When installing the belt, make sure not to damage the pretensioner.
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2. Remove the following items fist.
A. Front seat assembly.
B. Door scuff trim.
3. Remove the lower anchor.
Driver's
A. anchor after raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
Tightening torque :
39.2 - 53.98 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)
