Borrego 2WD V6-3.8L (2009)
Passenger's
A. Remover the seat belt lower anchor cover (A).
B. After loosening the seat belt lower anchor mounting bolt, disconnect the BTS connector (B).
4. Remove the center pillar lower trim (A).
5. Remove the assist handle (A).
6. Remove the center pillar upper trim (A).
7. Remove the upper anchor (A).
Tightening torque :
39.2 - 53.98 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)
8. Loosen the mounting bolt, then remove the pretensioner (A). After disconnecting the pretensioner lock pin, disconnect the seat belt pretensioner
