Borrego 2WD V6-3.8L (2009)
(BPT) connector (B).
Height Adjuster Replacement
1. Remove the following items first.
A. Front seat assembly.
B. Door scuff trim.
C. Front seat belt.
D. Center pillar trim.
2. After loosening the mounting bolt, then remove the height adjuster (A).
Tightening torque :
39.2 - 53.98 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)
3. Installation is the reverse of removal.
Front Seat Belt Buckle Replacement
1. Remove the following items first.
A. Front seat assembly.
2. Remove the wire harness of buckle from seat.
3. Remove the seat belt buckle (A).
Tightening torque :
39.2 - 53.98 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)
4. Installation is the reverse of removal.