Borrego 2WD V6-3.8L (2009)
Control Arm: Service and Repair
Rear Assist Arm
Replacement
1. Remove the rear wheel & tire.
Tightening torque:
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)
2. Loosen the bolt.
3. Disconnect the assist arm (A) with rear carrier by using a SST (09568-34000).
4. Loosen the bolt (B) and then remove the assist arm (A).
5. Installation is the reverse of the removal.
