Borrego 2WD V6-3.8L (2009)
Control Arm: Service and Repair
Rear Lower Arm
Replacement
1. Remove the rear wheel & tire.
Tightening torque:
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)
2. Support the lower portion of the rear lower arm with a jack securely.
3. Loosen the bolt & nut (A, B) and then remove the rear lower arm.
Tightening torque:
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)
4. Installation is the reverse of the removal.
