Optima V6-2.7L (2003)
1. Disconnect door lock cylinder connector.
2. Remove two mounting bolts from outside handle assembly.
3. Remove door lock cylinder from outside handle assembly.
4. Push (1) side and pull (2) side with wrenching outside handle upside.
INSTALLATION
1. Install outside door handle assembly.
1. Position glass guide as originally positioned through access hole.
2. Install door lock cylinder on outside handle assembly.
3. Install two mounting bolts.
Tighten mounting bolts to 61 - 95 lb-in (7 - 11 N.m, 70 - 110 kg-cm)
4. Connect door lock cylinder connector.
2. Install door lock assembly.
1. Position it as originally positioned through access hole.
2. Install three mounting screws.