Optima V6-2.7L (2003)
13.
When "REPROGRAMMING COMPLETED" message is displayed, turn ignition key to the "OFF" position and disconnect Hi-Scan Pro from the
vehicle. Wait at least 20 seconds, start engine and verify normal operation.
* NOTICE
If reprogramming did not complete properly or was interrupted, repeat process using the following procedure.
01/02MY MANUAL REPROGRAMMING
PROCEDURE:
14.
Turn ignition key to the "ON" position.
15.
Turn Hi-Scan Pro on and select "11. OPTIMA 2.4 01/02MY BATTERY DRAIN" and press the "ENTER" key.