Optima V6-2.7L (2003)
8.
When the "REPROGRAMMING COMPLETED" message is displayed, check the new ECM ID displayed on the Hi-Scan Pro screen to verify that
the correct ECM software has been downloaded. Refer to the ECM SPECIFICATIONS in this TSB for the ECM ID listing. Turn the Hi-Scan Pro
OFF to complete the download procedure.
9.
To verify the reprogramming is completed successfully, turn the ignition switch to the OFF position for 20 seconds. Start the engine and check for
proper engine operation.
10.
Check for DTC using the Hi-Scan Pro with system software card and erase any DTC.
TROUBLESHOOTING:
1.
"INVALID PASSWORD" - Enter the correct password for the automatic update mode again (0525).
2.
"REPROGRAMMING ERROR PLEASE WAIT FOR RETRY" - An error occurred during reprogramming, the Hi-Scan Pro will retry the
reprogramming automatically.
3.
"THIS ECM IS DIFFERENT TYPE" - The ECM on this vehicle is not the type subject to this reprogramming procedure.
4.
"ALREADY REPROGRAMMED" - The reprogramming has previously been done on this vehicle.
5.
"REPROGRAM ERROR PLEASE CHECK SYSTEM" - In this case, you must reprogram manually by selecting menu Option "02. MS 2.7
03~04MY INTERMITTENT HESITATION [ERROR]".
AFFECTED PRODUCTION RANGE:
2003 - 2004MY Optima vehicles with production dates between 5/31/02 - 4/25/03 and 2004MY vehicles with production dates between 5/14/04 -
7/24/04.
WARRANTY CLAIM INFORMATION:
