Rio L4-1.6L (2004)
3) Connecting rod bearing thickness
22. Apply a coat of clean engine oil to connecting rod bearing in connecting rod cap.
23. Install connecting rod cap and torque to specification.
Tightening torque: 22 - 24 ft. lbs. (29 - 34 Nm, 3.0 - 3.5 kgf-cm)
24. Insert a thickness gauge between connecting rod and crankshaft and check connecting rod side clearance.
NOTE: Do not measure between connecting rod cap and crankshaft.
Side clearance: 0.0044 - 0.0103 inch (0.110 - 0.262 mm)
Maximum: 0.012 inch (0.30 mm)
25. If side clearance exceeds maximum side clearance specification, replace connecting rod and cap.