Rio L4-1.6L (2004)
Air Bag: Service and Repair
Air Bag Deployment and Disposal
Air Bag Module (Driver Side)
AIRBAG DEPLOYMENT AND DISPOSAL
WARNING:
-
FAILURE TO FOLLOW ALL WARNINGS, CAUTIONS, NOTICES AND PROCEDURES COULD RESULT IN PERSONAL INJURY
OR DEATH.
-
SURFACE OF A DEPLOYED AIRBAG MAY CONTAIN SMALL AMOUNTS OF SODIUM HYDROXIDE(NAOH). PREVENT
CONTACT OF AIRBAG MODULE WITH LIQUIDS, COMBUSTIBLES, AND FLAMMABLE MATERIALS.IMMEDIATELY WASH
HANDS AND EXPOSED SKIN AREAS WITH MILD SOAP AND WATER. FLUSH EYES WITH WATER IF EXPOSED TO BY
PRODUCTS. FAILURE TO FOLLOWING THESE INSTRUCTIONS COULD RESULT IN CHEMICAL BURNS AND PERSONAL
INJURY.
-
A LIVE(UNDEPLOYED) AIRBAG MODULE MAY ACCIDENTLY DEPLOY DURING HANDLING. WHEN CARRYING A LIVE
AIRBAG MODULE, POINT TRIM COVER AWAY FROM YOUR BODY TO LESSEN CHANCE OF INJURY IN CASE OF
ACCIDENTAL DEPLOYMENT. NEVER CARRY MODULE BY ITS WIRING OR CONNECTORS.
-
ALWAYS PLACE LIVE AIRBAG MODULES FACE UP TO LESSEN MOTION OF MODULE IN CASE OF ACCIDENTAL
DEPLOYMENT. KEEP AREA CLEAR OF PARTS, TOOLS, AND DEBRIS.
-
NEVER PLACE ITEMS ON OR ABOVE TRIM COVER OF A LIVE AIRBAG MODULE. IN CASE OF ACCIDENTAL
DEPLOYMENT, SUCH ITEMS MAY CAUSE SERIOUS INJURY OR DEATH. DAMAGED AIRBAG MODULES SHOULD BE
STORED AWAY FROM ALL ACIDS, HALOGENS, HEAVY METALS, AND METAL SALTS. DAMAGED UNITS MAY PRODUCE
HYDROZOIC ACID IF EXPOSED TO LIQUIDS. IF AN UNDEPLOYED AIRBAG MODULE OR INFLATOR IS RUPTURED OR
TAMPERED WITH, REFER TO PARTICULAR MODULE? MSDS (MATERIAL SAFETY DATA SHEET) FOR IMPORTANT
INFORMATION CONCERNING CONSTITUENTS OF UNDEPLOYED MODULES. EXPOSURE TO HIGH CONCENTRATIONS
OF PROPELLANT MIXTURE CAN CAUSE HEADACHES, NAUSEA, BLURRED VISION, FAINTNESS, CYANOSIS, LOWERING
OF BLOOD PRESSURE OR TACHYCARDIA. FAILURE TO COMPLY WITH THIS WARNING CAN RESULT IN FIRE, NOXIOUS
FUMES, SEVERE PERSONAL INJURY, OR DEATH.
-
DAMAGED AIRBAG MODULES SHOULD BE STORED AWAY FROM ALL ACIDS, HALOGENS, HEAVY METALS, AND
METAL SALTS DAMAGED UNITS MAY PRODUCE HYDROZOIC ACID IF EXPOSED TO LIQUIDS. IF AN UNDEPLOYED
AIRBAG MODULE OR INFLATOR IS RUPTURED OR TAMPERED WITH, REFER TO PARTICULAR MODULE?
MSDS(MATERIAL SAFETY DATA SHEET) FOR IMPORTANT INFORMATION CONCERNING CONSTITUENTS OF
UNDEPLOYED MODULES EXPOSURE TO HIGH CONCENTRATIONS OF PROPELLANT MIXTURE CAN CAUSE
HEADACHES, NAUSEA, BLURRED VISION, FAINTNESS, CYANOSIS, LOWERING OF BLOOD PRESSURE OR
TACHYCARDIA. FAILURE TO COMPLY WITH THIS WARNING CAN RESULT IN FIRE, NOXIOUS FUMES, SEVERE
PERSONAL INJURY, OR DEATH.
-
AIR BAG MODULE COMPONENTS ARE VERY HOT AFTER DEPLOYMENT. UNITS SHOULD BE DEPLOYED OUTDOORS OR
IN AN OPEN AREA TO PREVENT FIRES. ALLOW COMPONENTS AT LEAST TWENTY MINUTES TO THOROUGHLY COOL.
COOLING MODULES SHOULD BE CONTINUOUSLY MONITORED TO ENSURE HOT COMPONENTS DO NOT CREATE
FIRES WITH SPILLED LIQUIDS OR OTHER DEBRIS. FAILURE TO ALLOW UNIT TO COOL COULD RESULT IN BURNS,
FIRES OR PERSONAL INJURY.
-
ALWAYS WEAR RUBBER GLOVES AND SAFETY GLASSES WHEN HANDLING A DEPLOYED AIRBAG MODULE.
CAUTION: Storage, transportation, disposal and recycling of airbag module and components must be performed in accordance with all applicable state
and local regulations including, but not limited to, environmental protection, occupational health and safety, and transportation.
WARNING: FAILURE TO FOLLOW THE FOLLOWING PROCEDURES COULD RESULT IN PERSONAL INJURY OR DEATH.
