Rio L4-1.6L (2004)
1. Remove battery.
2. Wait 10 minutes before proceeding.
3. Disconnect appropriate Airbag Module, and remove from vehicle. For Driver airbag module, refer to Air Bag Module. For Passenger Airbag
Module, refer to Passenger Air Bag Module.
4. Locate airbag in an area that will provide protection to personnel when it deploys. An example of a safe deployment site is a stack of used tires,
6-8 high, with undeployed bag located inside column of tires.
5. Connect the Air Bag Deployment Tool (k95U-6000-BDY) to the Air Bag Module connector, and position the deployment tool 20 feet away from
the deployment site.
6. Connect the red lead to the positive terminal of the battery.
7. Connect the black lead to the negative battery terminal.
WARNING: DO NOT PLACE THE AIRBAG WITH THE TRIM COVER FACING DOWN, AS THE FORCE OF THE DEPLOYING
AIRBAG CAUSE IT TO RICOCHET AND CAUSE PERSONAL INJURY.
