Rio L4-1.6L (2004)
12. Completely fill the area shaded in the figure with a lithium grease.
13. Position the brake drum bearings and hub assembly on the spindle.
14. Keep the drum which is centered on the spindle to prevent a damage to the oil seal and spindle threads.
15. Install the outer bearing.
16. Install the washer.
17. Install new lock nut.
18. Adjust the bearing preload.
Bearing Preload: 5.6 - 8.6 ft. lbs. (0.65 - 0.98 Nm, 6.5 - 10 kg-cm)