kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Air Bag Control Module > < Driver Airbag|Page 6211
Page 2
background image

If an intact airbag has been removed from a scrapped vehicle, or has been found defective or damage during transit, storage or service, it should be
deployed as follows :

1. Confirm that the special is functioning properly by following the check procedure.
2. Position the airbag face up, outdoors on flat ground at least thirty feet (10 meters) from any obstacles or people.

DISPOSAL OF DAMAGED AIRBAG

1. If installed in a vehicle, follow the removal procedure of driver's airbag front passenger's and side airbag.
2. In all cases, make a short circuit by twisting together the two airbag inflator wires.
3. Package the airbag in exactly the same packing that the new replacement part come in.

Air Bag Control Module > < Driver Airbag|Page 6211