Rio5 L4-1.6L (2006)
8. If the hub axial play exceeds the limit while the nut is tightened to 200 - 260 Nm (20 - 26 kgf-m, 145 - 188 ft. lbs.), the bearing, hub and knuckle
are not installed correctly. Repeat the disassembly and assembly procedure.
Hub bearing axial play [Limit] 0.008 mm (0.0003 inch) or less
9. Remove the Special Tool.
10. Fix the brake disc with the mounting screws.
INSTALLATION
1. Installation is reverse of the removal.
2. Install the strut assembly (A) and the drive shaft (B) in the knuckle.
Tightening torque Nm (kgf-m, ft. lbs.): 100 - 120 (10 - 12, 72 - 86)
3. Install the lower arm assembly mounting bolts (A) to the knuckle.
Tightening torque Nm (kgf-m, ft. lbs.): 100 - 120 (10 - 12, 72 - 86)
4. Install the wheel speed sensor (A) to the knuckle (B).