Rio5 L4-1.6L (2006)
13. Apply the specified grease to the bellows mounting position (fitting groove) of the tie rod.
Recommended grease: Silicone grease
14. Install the new attaching band to the bellows.
NOTE: When the bellows are installed, a new band must be used.
15. Install the bellows in position, taking care not to twist it.
16. Fill the dust cover inner side and lip with the specified grease, and fix the dust cover in position with the clip ring attached in the groove of the tie
rod end.
Recommended grease
A: POLY LUB GLY 801K or equivalent
B: SHOWA SUNLIGHT MB2 or equivalent
Dust cover inner side and lip: THREE BOND
17. Install temporarily the tie rod (A) to the tie rod end (B).