Rio5 L4-1.6L (2006)
6. Install the UTJ boot bands and UTJ boot.
7. Using the alignment marks (D) made during disassembly as a guide, install the spider assembly (A) and snap ring (B) on the driveshaft splines (C).
8. Add the specified grease to the joint (UTJ) boot as mush as wiped away at inspection.
9. Install the boots.
10. To control the air in the UTJ boot, keep the specified distance between the boot bands when they are tightened.
STANDARD VALUE [A]
11. Install both sides of the boot bands.
