Sephia GS Sedan L4-1.8L (1997)
21.
Gently remove foam pad covering evap hoses and wires.
22.
Remove old evap hoses and tubes and discard.
23.
Install new campaign hoses, tubes and FTPS as illustrated.
24.
Reinstall foam pad.
25.
Carefully reinstall fuel tank being careful not to pinch any wires or hoses.
* NOTICE
Positioning the fuel filler and vent hoses on the fuel filler pipe before tank is fully installed will make installation easier.
26.
Tighten fuel tank straps.