Sephia GS Sedan L4-1.8L (1997)
27.
Install 6 mm bolt that secures FTPS to body.
28.
Connect charcoal canister hoses.
29.
Connect fuel filler and vent hoses.
* NOTICE
The hose from the FTPS to the vapor separator should be trimmed to correct length, and installed on the 6 mm pipe closest to the vent pipe.
30.
Lower vehicle.
31.
Reconnect fuel hoses.
32.
Install wire harness and grommet back through fuel pump access cover.
33.
Reinstall fuel pump access cover.
34.
Reconnect C304 and C399.
35.
Install rear seat cushion.
36.
Refill fuel tank (if drained).
37.
Install fuel filler cap.
38.
Start vehicle and check for leaks.
39.
Apply supplied campaign completion slicker to inside of fuel filler door as shown in photo.
