Sephia GS Sedan L4-1.8L (1997)
Steering Gear: Service and Repair
Manual Steering
REMOVAL
1. Loosen the wheel lug nuts.
2. Raise the front of the vehicle and support it with safety stands.
3. Remove the wheels.
4. Remove in the order shown in the figure, referring to REMOVAL NOTE.
REMOVAL NOTE:
Tie-Rod End
1. Pull out the cotter pins, and remove the nuts.
2. Separate the tie-rod from the knuckle arm with the SST (or equivalent).
NOTICE: Replace the nuts temporarily so the screw threads do not become damaged.
