Sephia GS Sedan L4-1.8L (1997)
Steering Rack And Linkage
1. Remove the steering rack from the right side of the vehicle. If necessary, replace rack and linkage entirely, do not disassemble.
INSTALLATION
Install in the reverse order of removal
INSTALLATION NOTE:
1. Install and tighten the four steering rack nuts.
Tightening torque: 23-34 ft. lbs. (31-46 Nm)
2. Tighten the universal joint pinch bolt.
Tightening torque: 13-20 ft. lbs. (18-27 Nm)
3. Bleed air from the power steering fluid.
4. Adjust the toe-in.