Sephia GS Sedan L4-1.8L (1997)
NOTICE: Do not deform the snap ring when removing it.
14. Replace the O-rings with new ones.
15. Install the band servo assembly into the transaxle case and secure it with the snap ring.
16. Install the control valve body and oil pan, refer to CONTROL VALVE BODY.
17. Loosely install nuts A and bolts B of the engine mounting member.
18. Install the engine mounting member.
Tightening torque:
(A): 28 - 38 ft. lbs. (38 - 51 Nm)
(B): 48 - 65 ft. lbs. (64 - 89 Nm)
19. Remove the SST (engine support) from the engine.
20. Pour in ATF, and with the engine idling, check the ATF level and check for leaks, refer to FLUID LEAKS.
21. Drive the vehicle and check the shift points, shift schedule, and shift quality, refer to ROAD TEST.
