Differential Assembly: Specifications

Differential Assembly: Specifications

Side and Pinion Gear

Backlash:

Standard .................................................................................................................................................................  0.001 - 0.004 in. (0.025 - 0.1 mm)
Maximum .......................................................................................................................................................................................  0.020 in. (0.5 mm)

Pinion Shaft

Preload ....................................................................................................................................................................................  4.3 lb-in (0.5 Nm, 0.05 kg)

Bearing

Preload ...........................................................................................................................................................  27.6 - 33.6 lb-in (3.0 - 3.9 Nm, 30 - 40 kg)

Locknuts

Primary And Secondary Shafts

Torque ........................................................................................................................................................................  98 - 158 ft. lbs. (133 - 214 Nm)

Transaxle Case Installation Bolts

Torque ..............................................................................................................................................................................  27 - 38 ft. lbs. (37 - 52 Nm)