Sephia Sedan L4-1.6L SOHC 16V (1993)
Thermostat: Service and Repair
NOTE: On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
1. Disconnect battery ground cable and drain engine coolant.
2. Disconnect coolant temperature sensor connector.
3. Remove radiator hose from thermostat housing, then remove mounting bolts.
4. Remove gasket and thermostat.
5. Reverse procedure to install. Use a new gasket and tighten to specifications.
6. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
