Sephia Sedan L4-1.6L SOHC 16V (1993)
Refrigerant Oil: Technical Service Bulletins
A/C - Lubricant Guidelines
VOLUME
3
GROUP
Climate Control
NUMBER
007
MODEL
All
DATE
January 2005
SUBJECT:
A/C LUBRICANT GUIDELINES
This bulletin provides information relating to the proper amount of air conditioning lubricant FD46XG and ZXL 200PG, to be used during servicing
and/or replacement of air conditioning system components.
WARNING
^
Air conditioning refrigerant or lubricant vapor can irritate your eyes, nose and throat.
^
Be careful when connecting and disconnecting service equipment
^
Do NOT breathe refrigerant or vapors
^
This product does not contain any of the chemicals that are listed on the State of California 5 Proposition 65 list as cancer causing agent or
potential reproductive toxins.
PROCEDURE:
1.
Connect A/C recovery equipment, recover refrigerant and PAG oil as required.
2.
Measure amount of recovered PAG oil after recovery of refrigerant is complete.
3.
Clean and/or flush lines as required, replace defective component. Add new refrigerant oil as recommended by table below plus the amount of
recovered PAG oil. DO NOT RE-USE PAG OIL, ALWAYS REPLACE WITH NEW OIL.
4.
Evacuate and recharge the A/C system as required. Perform A/C system leak test after all repairs have been made and system is operating as
designed.
^
NEVER re-use PAG oil, replace with fresh new oil always. PAG oil absorbs moisture and replacement is always recommended. Use ONLY
recommended type and quantity.
^
If the oil amount in the A/C system is lower than the specified amount, compressor durability will be decreased.
^
If the oil amount in the A/C system is higher than the specified amount, A/C performance will be decreased.
