Sephia Sedan L4-1.6L SOHC 16V (1993)
Valve Body: Service and Repair
NOTE: On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
Fig. 5 Valve Body Bolts
1. Disconnect battery ground cable.
2. Raise and support vehicle.
3. Drain transmission fluid, then remove pan and gasket.
4. Remove clip and solenoid valve connector.
5. Remove bolts A (1.18 inch long) and B (1.97 inch long) and brackets, Fig. 5.
6. Remove valve body carefully to prevent damage.
7. Reverse procedure to install, noting the following:
a. Torque valve body bolts A and B, Fig. 5, to 70-95 inch lbs.
b. Install new pan gasket.
c. Torque pan bolts to 74-95 inch lbs.
d. Refill transaxle to proper level with specified fluid.
8. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.