kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Timing Belt|Specifications|Page 1098 > < Timing Belt|Specifications|Page 1096
Page 13
background image

11. Install the timing belt lower cover(A) with 5bolts(B).

Tightening torque: 7.8 - 9.8Nm (0.8 - 1.0 kg-m, 5.8 - 7.2 ft. lbs.) 

12. Install the flange and crankshaft pulley(A), and then tighten crankshaft pulley bolt(B). Make sure that the crankshaft sprocket pin fits into the small

hole in the pulley.
Tightening torque: 166.7 - 176.5Nm (17 - 18kg-m, 123.0 - 130.2 ft. lbs.) 

13. Remove the power steering pump and use a wire to secure the pump to the vehicle so that it is out of the way.

Tightening torque: 7.8 - 9.8Nm (0.8 - 1.0 kg-m, 5.8 - 7.2 ft. lbs.) 

14. Install the water pump pulley and 4 bolts.
15. Install the power steering pump drive belt.
16. Install the air conditioner compressor drive belt.

17. Install the alternator drive belt.
18. Tighten the bolts of water pump pulley.

Timing Belt|Specifications|Page 1098 > < Timing Belt|Specifications|Page 1096