Spectra L4-2.0L (2004)
5. Disconnect the tie rod end ball joint(A) from the knuckle(D) using the special tool (09568-34000).
NOTE: Be sure to secure the ball joint, remove tool to the vehicle so that it doesn't fan when the joint is removed.
a. Remove the split pin(c).
b. Remove the lock nut (D).
c. Disconnect the ball joint(A) from knuckle(B) using the special tool (09568-34000).
6. Disconnect the strut assembly from the knuckle.
7. Disconnect the lower arm ball joint from the knuckle using the special tool.
8. Remove the hub and knuckle as an assembly.
CAUTION: Be careful not to damage the boot and tone wheel.
DISASSEMBLY
1. After removing the fixed screws(A) mounting the brake disc(C), remove the brake disc(C) from the hub(B).
