Spectra L4-2.0L (2004)
2. Remove the snap ring(A).
3. Install the special tools (09517-29000, 09517-21500) as shown in illustration below.
4. Separate the hub from the knuckle by turning nut(A) of the special tool (09517-21500).
5. Using a plastic hammer, remove the dust cover from the knuckle.
6. Remove the bearing inner race(B) from the hub(A) using the special tool (09495-33000).
7. Using the special tools (09495-33100, 09517-29000), remove the wheel bearing outer race(A)from the knuckle(B).
INSPECTION
Wheel Bearing Check
