Sportage 4WD L4-2.0L (2005)
^
ONLY use approved reprogramming software designed for the correct model, year and engine size. Failure to do so may create other drivability
issues due to the use of the incorrect ECM/PCM calibration.
INSTALLATION PROCEDURE:
1.
Attach the OBD II Data Link Connector (DLC) (20 pins connector) cable to the Hi-Scan Pro main body and tighten the two (2) screws securely.
2.
Remove the current system software card from the Hi-Scan Pro and insert the reprogramming software card with the new TCM program into the
Hi-Scan Pro top slot.
