Sportage 4WD 2Dr L4-2.0L (2002)
8.
When "REPROGRAMMING COMPLETED" message is displayed, turn ignition key to the "OFF" position and disconnect Hi-Scan Pro from the
vehicle. Wait at least 20 seconds, start vehicle and verify normal operation.
* NOTICE
If the reprogramming did NOT complete properly or was interrupted, repeat the process using the following procedure.
9.
Turn ignition key to the "ON" position.
10.
Turn Hi-Scan Pro on, select "09 SPECTRA 1.8D START ABILITY" and press the "ENTER" key.
11.
Select "02 SPECTRA 02/03 MY [ERROR MODE]" and press the "ENTER" key.
