Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)17 · Body fittings
17 · Body & interior

Sun roof GLASS PANEL - R.R.

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Sun roof and hood › Sun roof GLASS PANEL - R.R.
Body fittingsSun roof GLASS PANEL - R.R.

Sun roof GLASS PANEL - R.R.

Operation 7030B18 · SLIDING ROOF

Open the sunroof in the spoiler position before carrying out the operations described below.

Removing

- Disconnect the negative battery terminal.

1. Move the sunroof blind (1a) backwards acting on the retaining springs (1b).

Sun roof GLASS PANEL - R.R.
DescriptionConnector
1bSolar cells for sun roof (CTA)A050

1. Undo the fixing bolts (1a) and remove the glass (1c) releasing it from the contacts (1b).

Sun roof GLASS PANEL - R.R.

Refitting

DescriptionConnector
1bSolar cells for sun roof (CTA)A050

- Place the glass in position fitting it on the contacts.

- Tighten the bolts fixing the glass to the guides and align it to the roof in the"closed" position.

- Reposition the sunroof blind.

- Connect the negative battery terminal.

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.