Brake fluid reservoir - r + r and wash inside

Operation 3330C30 · BRAKE PUMP, RESERVOIR AND LOAD PROPORTIONING VALVE

Removing

- Disconnect the negative battery terminal.

See in Op. 3330C40 brake fluid reservoir plug - r + r

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

- Position a suitable container for collecting the brake fluid.

1. disconnect the electrical connection for the brake fluid minimum level warning light switch.

2. Disconnect the brake fluid flexible supply pipe to the clutch master cylinder.

3. Undo the bolt fixing the brake fluid reservoir to the brake pump master cylinder.

4. Extract the brake pump fluid reservoir.

Refitting

- Wash the inside of the brake fluid reservoir.

- Position the brake fluid reservoir in the special housing and fasten it using the bolt.

- Connect the brake fluid pipe to the clutch master cylinder.

- Connect the electrical connection for the brake fluid minimum level warning light switch.

See in Op. 0010T64 Brake and/or clutch fluid - Check level and top up, if necessary

See in Op. 0010T65 HYDRAULIC BRAKING SYSTEM - BLEED AIR

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 3330C40 brake fluid reservoir plug - r + r

- Connect the negative battery terminal.