Left CYLINDER HEAD - Overhaul
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Cylinder head – s › Left CYLINDER HEAD - Overhaul
Left CYLINDER HEAD - Overhaul
See in Op. 1016E22 Right CYLINDER HEAD - Overhaul - Dismantling
Removing
1. Undo the bolts (1a) and remove the power steering pump (1b).
2. Undo the bolts (2a) and remove the power steering pump mount (2b).
- Proceed as described for the right cylinder head, remembering that the left cylinder head is not equipped with: the reaction rod engine bracket and mobile timing belt tensioner.
Refitting
- Proceed as described for the right cylinder head, remembering that the left cylinder head is not equipped with: the reaction rod engine bracket and mobile timing belt tensioner.
1. Place the power steering pump mount (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1B | (Cylinder head side) 2.3 - 2 | Bolt | POWER STEERING PUMP SUPPORT/BRACKET | M8 |
2. Place the power steering pump (2a) in its housing and secure it by tightening the bolts (2b) to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 2b | (Mount side) 2.3 - 2.8 | Bolt | POWER STEERING PUMP | M8 |
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.