Vacuum reservoir - r.r.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Emission control system › Vacuum reservoir - r.r.
EngineVacuum reservoir - r.r.
VACUUM RESERVOIR - R.R.
Removing
See in Op. 1016A10
- Disconnect the negative battery lead.
1. Disconnect the electrical connection for the throttle casing pneumatic solenoid avlve.
| Description | Connector | |
|---|---|---|
| 1 | Throttle body solenoid valve | L062 |
2. Undo the fixing nuts (2a), disconnect the pipe (2b) connected to the pneumatic valve and remove the vacuum reservoir (2c).
Refitting
- Fit the vacuum reservoir on the mounting bracket.
- Tighten the fixing bolts.
- Connect the connecting pipe to the pneumatic valve.
- Connect the electrical connection for the throttle casing solenoid valve.
| Description | Connector | |
|---|---|---|
| Throttle body solenoid valve | L062 |
See in Op. 1016A10
Parts & tools for this job For 2002 Lancia Thesis
- PARTExhaust gasketSearch: Lancia Thesis 2002 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.