Valve tappet clearance check

Make

Lancia

Model

Thesis Factory Service Manual

Year

2002–2009

Section

Tiiming system › Valve tappet clearance check

EngineValve tappet clearance check

VALVE TAPPET CLEARANCE CHECK

Operation 1036H14 · TAPPETS AND ROCKER SHAFTS

2.4 JTD 10V

Removing

See in Op. 1016A10

See in Op. 1016A20

1. Using a feeler gauge (1a), measure the clearance (1b) between the camshaft lift and a tappet shim.

- Rotate the camshaft and check the clearance for all the tappets.

	Subject	Value
	Inlet valves clearance in closed position	mm
	Inlet valves clearance in closed position	0.25 - 0.35

	Subject	Value
	Exhaust valves clearance in closed position	mm
	Exhaust valves clearance in closed position	0.30 - 0.40

Refitting

See in Op. 1016A20

See in Op. 1016A10

08 Engine