Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

(electric) rear windows not working

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Electric windows › (electric) rear windows not working
Fault diagnosis(electric) rear windows not working

(ELECTRIC) REAR WINDOWS NOT WORKING

When the ignition is in the ON position, when the buttons located in the doors are operated the electric rear windows do not work at all.

the electric rear windows are managed by the luggage compartment node; the driver's door node, in particular can operate and also deactivate the electric rear windows via the B-CAN.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
0PRELIMINARY CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the operation of the electric rear windows has not been inhibited by the driver's door node (ideograms on the rear buttons off)Move on to StepOperation of the rear electric windows inhibitedActivate the operation of the electric rear windows via the driver's door node
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Using the diagnostic equipment (Examiner or other instruments) connected, check the following information at the CAN network:

  • no control unit not activated;
  • that there are no faulty control units;
  • no control unit with faulty CAN line;
Move on to Step1. Presence of faults1. Continue following the instructions for the diagnostic equipment
2. Luggage compartment node not activatedMove on to Step
2ELECTRICAL SYSTEM CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check:

  • the connection between the luggage compartment junction unit and the luggage compartment node
Move on to StepConnections interrupted

Restore the connections

(Wiring Diagram ) E3051 ELECTRIC REAR WINDOWS

3CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Connect the diagnostic equipment (Examiner or Examiner plus) to the diagnostic socket:

  • that there are no errors in the luggage compartment node control unit
Move on to StepPresence of errors in the luggage compartment node control unitContinue following the instructions in the diagnostic table
4SERVICES RELAY ELECTRICAL CIRCUIT CHECK (POWER CIRCUIT)ALL OKPROBLEMS ENCOUNTEREDACTION

Check the continuity of the connections between the services discharge relay and the luggage compartment node

(Wiring Diagram ) E3051 ELECTRIC REAR WINDOWS

Move on to StepConnections interrupted

Restore the connections

(Wiring Diagram ) E3051 ELECTRIC REAR WINDOWS

5CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer presentFault persistsReplace the luggage compartment node

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.