Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)06 · Maintenance
06 · Maintenance

AUTOMATIC TRANSMISSION FLUID - Change

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
New units and maintenance › AUTOMATIC TRANSMISSION FLUID - Change
MaintenanceAUTOMATIC TRANSMISSION FLUID - Change

AUTOMATIC TRANSMISSION FLUID - Change

Operation 0010T44 · Vehicle oil and fluids

3.0 V6, 3.2 V6

- Position the vehicle on a lift.

- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.

See in Op. 1048A11 COMPLETE AIR FILTER -R.R.

- Raise the vehicle on the lift.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Position a container to collect the automatic transmission fluid.

1. Undo the plug and drain the transmission fluid

AUTOMATIC TRANSMISSION FLUID - Change

- Tighten the oil drain plug.

- Lower the vehicle

1. Undo the bolt (1a) fixing the transmission fluid dipstick retaining plate (1b).

AUTOMATIC TRANSMISSION FLUID - Change

1. Remove the transmission fluid dipstick (1a) complete with seal (1b) and, using a suitable system, refill the gearbox via the level inspection opening (1c) using the recommended fluid.

DescriptionQty.ComponentTypeClassification
TUTELA GI/A7,25 LitriAUTO TRANSMISSION FLUID
AUTOMATIC TRANSMISSION FLUID - Change

- Position the dipstick checking the condition of the seal, then secure the retaining plate tightening the bolt to the recommended torque.

Value - daNmFasteningComponentØ
0,5BoltAUTO TRANSMISSION FLUIDM6

- Raise the vehicle

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Lower the vehicle

See in Op. 1048A11 COMPLETE AIR FILTER -R.R.

See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

2.4 20V

- Position the vehicle on a lift.

- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1048A10 COMPLETE AIR FILTER -R.R.

- Raise the vehicle on the lift.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Position a container to collect the automatic transmission fluid.

1. Undo the plug and drain the transmission fluid

AUTOMATIC TRANSMISSION FLUID - Change

- Tighten the oil drain plug.

- Lower the vehicle

1. Undo the bolt (1a) fixing the transmission fluid dipstick retaining plate (1b).

AUTOMATIC TRANSMISSION FLUID - Change

1. Remove the transmission fluid dipstick (1a) complete with seal (1b) and, using a suitable system, refill the gearbox via the level inspection opening (1c) using the recommended fluid.

DescriptionQty.ComponentTypeClassification
TUTELA GI/A7.25 LitriAUTO TRANSMISSION FLUIDOilATF DEXRON III
AUTOMATIC TRANSMISSION FLUID - Change

- Position the dipstick checking the condition of the seal, then secure the retaining plate tightening the bolt to the recommended torque.

Value - daNmFasteningComponentØ
0,5BoltAUTO TRANSMISSION FLUIDM6

- Raise the vehicle

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Lower the vehicle

See in Op. 1048A10 COMPLETE AIR FILTER -R.R.

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.